After my last trip, I decided that it was definitely time for some waders. It turns out that this is quite an investment, so I shopped around a bit online to see what was what, and ended up choosing a pair of Orvis Silver Sonic convertible-top waders, plus a pair of Simms Freestone (non-felt soles).
I’m a little annoyed with the Orvis waders, because the sizing is pretty limited. I noticed that they had a “Long” size, which I had hoped would mean I’d be able to get a really good fit. It turns out that “Long” also means “Huge”, and so the Large/Long size, which has a perfect leg-length for me, leaves enough room for me to carry a small child in the spare belly room that the waders have. Instead of swimming inside them, I’ve opted for the Large size, which is definitely not quite as long as I’d like in the legs, but the body fits much more reasonably. I really want to get out and try them though to make sure that the fit isn’t going to be too restrictive for getting in and out of waters, hiking around a bit, etc. The bootie is also probably not quite as big as I’d like it to be, so I’m a little concerned that’s going to be a problem if I want to be out there for longer and remain comfortable. The more I look at the specs online, the more I think maybe the guy at the store handed me the wrong size; I think I’ll take them back in and try again on a Large/Long.
As for the boots — I bought the Simms without trying them on, and I think they’re going to work perfectly. They’re pretty huge (size 13 after all), but seem to be a nicely put-together boot, somewhat reminiscent of my Keen hiking boots. I don’t have any studs or cleats yet, I figured I’d give them a shot and see how they feel before I go spending another $30+ on those modifications. After looking around at the options, the Simms had great reviews, seemed solid, and had options for additional traction. I opted for the non-felt sole, since it sounds like felt causes problems with “aquatic hitchhikers”.
UPDATE: I took the waders back to Orvis and exchanged them for a pair of Large/Long, which, while definitely bigger in the body, fit me much better as far as the inseam is concerned. The pair I got turned out to have a busted seam holding the flip-out chest-bag in place, so I’m going to go and exchange them AGAIN, and then hopefully I’ll finally have waders and boots and can actually go out and try them.
I don’t remember where I first came across Tenkara, but I know that as soon as I did, I was quite enamored with the idea of it. In short, tenkara uses an extra long (normally 11 to 14 feet) telescopic rod, with a fixed line and no spool. The line is attached directly to the end of the rod, and you use the length of the rod itself to provide reach/maneuverability rather than reeling out more line (and then stripping it back in again). After poking around a bit I’ve started following Tenkara USA (the first company to bring it to a wide audience in the US) quite closely to see what’s going on.
Tenkara is a very old, Japanese style of stream fishing which was used by commercial fishermen in the mountains. It’s very effective in smaller streams (vs big, wide, meandering flats rivers), and is ideally suited to Colorado-style fishing, where you’re mostly targeting 8-20″ trout. Fishing tenkara has a few other interesting twists, but the biggest (IMHO) is the focus on technique over equipment as far as flies/rigs go. Rather than encouraging complex rigs and continuously switching flies to try to find the perfect deception for where you’re fishing, tenkara encourages the use of one fly (or a small number of flies), and then focuses on different presentation techniques to trick fish into striking. There’s a certain allure to that simplicity, not least of which is avoiding having to buy (and know when to use) a bunch of different flies, knowing how to set up complex rigs, and all the wasted time re-tying things while on the water.
As mentioned in this previous post, I stopped by Orvis in Boulder (who also sell Tenkara USA equipment) to see Daniel Galhardo, the founder of Tenkara USA speak about tenkara fishing. He talked to a small group of us about the history, techniques and equipment, the types of fishing it’s suited to, how it differs from “western fly fishing”, etc. At the end of the presentation, we got to try out casting with a Tenkara USA rod (which is quite different from western casting), and then he also showed us how easy it is to tie a tenkara fly (pretty impressively so!).
Personally, there are a few things that draw me to tenkara:
- Simplicity: I love how simple the set up is, and how it minimizes the reliance on having all the “right equipment”.
- Portability: I really hate rigging up and retying my rod, so anything that can minimize my time spent doing that is welcome. Being able to collapse down the rod and spool up the line to get between fishing holes is really nice as well, and seems like it’d make hiking + fishing much more accessible.
- Technique: The focus on technique over equipment is a nice concept to me — it makes it more about me vs a fish than it does about just putting the right fly on there and hooking something. If I wanted to win that easily, I’d just use bait. That being said… everyone loves to actually catch fish, so I hope I’m up to the challenge. The casting technique of tenkara is also nice, because it seems much easier to master, and while the western style back/forward cast is quite beautiful, it requires a lot of room and finesse that seems a bit overkill.
I’m now angling (pun intended) to get a tenkara set up for Christmas so that I can try it out.
Header image taken from this Tenkara USA blog post.
I was deciding whether to go to Clear Creek again, or to try out Boulder Creek, but I luckily noticed this tweet:
so I went to the Orvis in Boulder to hear Daniel Galhardo speak about tenkara (more about that in this post), and came away with a new map book (updated version of this book) and a hand-tied tenkara fly from Daniel. After that stop-off, I headed to Boulder Creek and picked a pull-out pretty randomly (which I later established as turnout #2, according to a map of the area) to try my luck. Once I put on the fly that Daniel had given me, I got one step closer to finally landing my own fish — I hooked one, fought it in, then almost landed it. Since I didn’t really know what I was doing as far as landing a fish without a net, I tried to grab it once I got it in, and instead managed to hook my finger, and lose the fish 😛 . I think part of the lesson here is to make sure the fish is worn out a bit more, and also to get them to an easier to maneuver place before trying to get a hand on them. I was perched on a rock, and didn’t really have a good angle to get to the fish before I tried to grab it.
Walking upstream from the turnout, there’s a fording/crossing point (for cars, in the right conditions), and just above that there’s a bit of a pool area where I spotted a few fish that were feeding. Despite all my best efforts I couldn’t hook one of them; I think I’m just not presenting my fly convincingly enough for them to take interest.
At that point it was getting pretty late, so I decided to call it a day and, appropriately, ended up at a sushi restaurant in Boulder. Since I was solo, I got sat in a single empty seat at the bar, and the guy next to me turned out to be a visitor to the area (a physician, attending a conference in Boulder). He was Japanese, and tenkara turned out to be an interesting topic of discussion. We ended up splitting some sake, and then said our goodbyes so that I could make the miserable drive back down the construction-plagued Denver/Boulder Turnpike (36).
In October, I managed to combine 2 trips into one, and spend almost a week in Upstate New York for 2 conferences, with a day of fun in between. The two conferences were LevelUp Con (great, new conference!) and WordCamp Saratoga, which I spoke at. On the Friday in between the 2 (Oct 10), I had the day off to check out what Saratoga Springs had to offer.
Luckily for me, I have a few colleagues in the area, and 2 of them were willing to be my guides that day. First up, Sheri took me out for some kayaking in Fish Creek. She has a few boats, so I paddled in a smaller whitewater kayak, and she was paddling in an amazing, really impressive, Hornbeck boat. That thing is crazy — it’s so light and sleek. I’d love one, but don’t think I could justify it unless I lived really close to somewhere that I could use it all the time.
After that, Ben met us at the dock and then we headed off to the Batten Kill river for some fly fishing. Ben’s an avid angler, so he’d done some research to find a spot for us to check out, and luckily he had enough equipment for all three of us to fish at the same time.
The Batten Kill is an absolutely beautiful river (these photos don’t do it justice), surrounded by amazingly picturesque countryside. It really was gorgeous there, especially at this time of year (peak fall!). Apparently it’s notoriously difficult to fish, and I guess we demonstrated that by not seeing a single fish (in perfectly crystal-clear water!) the whole time we were there, let along getting a bite.
I also managed to lose one of Ben’s hand-tied flies by back-casting in a tree (that’s what I get for not having waders and being able to create some space). Regardless of the downsides, it was an awesome (albeit short!) fishing trip, and I’d love to go back in that area at some point.